Common Questions
How Do I Prepare My Swimming Pool for Opening?- Schedule your pool opening 3 weeks prior to any special occasion and let us know of any special requests or concerns
- Get your pool cover bag, ladder, rails, and any other related items out of storage
- Fill the pool to the middle of the skimmer and turn off the water
- Please make sure to unlock gates and please keep pets inside for their safety and ours
NOTE: Be sure to schedule your pool closing with us prior to preparing the pool for our arrival.
How Do I Clean My Pool Pump Basket?
- Turn pump OFF
- Close skimmer valves (Turn valves perpendicular to pipe)
- Depress multiport valve and turn to WASTE
- Turn pump ON
- Drain 3” to 6” below pool returns
- Turn pump OFF
- Depress multiport valve and turn to FILTER
- Turn pump ON and we will be there soon
- Turn pump OFF (Filter button, Switch, or Breaker)
- Close Valves in front of pump (Turn valves perpendicular to pipe)
- Open pump lid and remove basket. Clean debris and rinse.
- Replace pump basket and lid
- Open valves in front of pump (Turn valves parallel to pipe)
- Turn pump ON
Do not backwash before vacuuming unless filter pressure is over 6psi above normal operating pressure.
How Do I Backwash My Sand Filter?
- Attach the vacuum head to the telepole and insert vacuum hose to the top of the vac head.
- Place the vac head, hose, and pole into the deep end of pool, making sure pole is still sticking out of the water
- Take the un-attached end of hose and hold it in front of a return fitting. This will fill the vac hose with water. Wait until the vac head stops bubbling.
- Place your hand over the end of hose to keep the water in.
- Place skimmer basket adapter on top of skimmer basket, and insert hose onto adapter.
- Wait 1/2 minute to minute to ensure the pump is primed.
- Clean Away! Vacuum debris from your pool.
- When you are finished, turn pump OFF. Remove all vacuuming equipment and proceed to backwash (Sand & DE Filters)
NOTE: You should backwash when the filter pressure is 8-10 psi above normal.
Do you offer financing on custom inground swimming pool installation?
- Turn Pool Pump OFF (Filter Button, Switch, or Breaker)
- Depress the multiport valve handle and move it to the BACKWASH setting.
- Turn the Pump Back ON for at least 2 minutes. Wait until the water in the sight glass on the side of the multiport valve changes from cloudy to clear.
- Turn the Pump back OFF. Depress the multiport valve handle and turn it to RINCE.
- Turn the Pump Back ON for ½ minute
- Turn the Pump OFF. Depress the multiport valve handle and turn it to the filter setting.
- Turn the pool pump ON to resume normal operation. Inspect Filter Pressure to ensure the pressure has dropped to normal operating level. If it does not reach normal psi, give us a call.
We work with LightStream to offer excellent rates on home improvement loans specifically for swimming pools, outdoor kitchens, and other projects that we do for our customers. Just visit the LightStream website to learn more, or contact us if you have additional questions.